The Main Composition Of LED Garden Lights

LED garden lights are mainly composed of 5 major components:

1. LED light-emitting system: LED light source system includes: heat dissipation, light distribution, and LED modules.

2. Lamps: The LED lighting system is installed in the lamps. Cut the wire to make the wire, take a 1.0mm? red and black copper core stranded wire, each cut into 6 sections of 40mm, stripped at both ends of 5mm, and immersed in tin. To make the lamp board lead, take a YC2X1.0mm? two-core wire, cut a section of 700mm, strip the outer skin of 60mm at the inner end, strip the brown wire with 5mm, dip tin; strip the blue wire with 5mm, dip tin. The outer skin is stripped 80mm, the brown wire is stripped 20mm; the blue wire is stripped 20mm.

3. Light pole: The main materials of LED garden light pole are: equal-diameter steel pipe, heterosexual steel pipe, equal-diameter aluminum pipe, cast aluminum pole, and aluminum alloy pole. Commonly used diameters are Φ60, Φ76, Φ89, Φ100, Φ114, Φ140, Φ165. According to the height and the place used, the selected material thickness is divided into: wall thickness 2.5, wall thickness 3.0, wall thickness 3.5. (The above are regular sizes)

4. Flange and foundation embedded parts: Flange is an important component for the installation of LED garden light poles and the ground. Installation method of LED garden lights: Before installing the LED garden lights, you need to use M16 or M20 (common specifications) screws to weld into a basic cage according to the standard flange size provided by the manufacturer, and then dig a hole of appropriate size at the installation site , Put the basic cage in it, after the level is corrected, use cement concrete to pour to fix the basic cage, 3-7 days later the cement concrete is fully solidified, you can install the garden lights. (Note: The embedded pipeline needs to be led out when the LED courtyard light foundation is poured).